Heizkörper TSS10A H.E. für Station TS1100 - Quick QUHKTSS10A

When the heater in a TS1100 fails, the whole soldering bench stops. The TSS10A H.E. heating element is the part foreseen for it, with a length of roughly 160 mm replacing the fitted unit one to one, so neither the handpiece nor the station has to be swapped.

Features

• Factory part from Quick, no adaptation of the connector or the mounting position required.
• About 160 mm long and 20 mm across according to supplier data, matched to the TS1100 iron.
• Low mass of 0.02 kg, the handpiece keeps its familiar balance.
• Designed for the TS1100, which works with tips of the 960 range.
• Worth stocking, since the heater is the usual wear item on a station in continuous use.

Technical data

Applications

Repair of the TS1100 soldering station in electronics production, repair service and training, and as a reserve part at heavily used benches.

Scope of delivery and compatibility

One TSS10A H.E. heating element without tip. For the Quick TS1100 only. The 3104, 969A+, 969B+ and 709D+ stations take the H1901R heater instead.