digitale Industrie-Handlötstation 300 Watt TS10+ - Quick QUTS10+

Where several benches have to work to the same specification, setting each unit by hand costs time and creates drift. The Quick TS10 plus reads soldering parameters over USB and writes them back out, so an approved configuration can be transferred to further stations. Temperature stability is ± 2 °C without load.

What it offers

• Data import and export over USB, plus two way MODBUS communication and an IoT cloud service according to the manual.
• Built in ESD test function, so the state of the workplace can be checked at the station itself.
• 300 W with the cartridge system and a heat up time of 3 seconds from room temperature to 300 °C.
• Colour LCD TFT showing actual and target value, three directly selectable memories, deviation alarm and password protection.
• Figures for ESD records, ground resistance below 2 Ω and ground leak voltage below 2 mV.

Technical data

Application

Electronics manufacturing, workshop, service and rework on boards, assemblies and connectors. The real gain shows in structured environments where settings are transferred, documented or several stations are managed centrally. Suitable for leaded and lead free solder.

Scope of delivery

Station with soldering iron and 1.2 m silicone lead, holder with brass cleaning wool and viscose sponge for dry and wet tip cleaning.

Compatibility

The manual calls for original long life tips of the Quick TSS10 series, with the QUELKTSS10 as spare iron. Benches that do not need data interfaces reach the same soldering and cartridge system with the TS10.