Kartuschen-Lötspitze TS1, 30° abgewinkelt, bleistiftspitz 0,2 mm (SS1-J) - Quick SS1-J

On a densely populated board a repair fails more often for lack of access than for lack of a fine point. This SS1 tip carries the same 0.2 mm cone as the straight version but is bent by 30 degrees, which brings it onto leads sitting behind an electrolytic capacitor or under a shield frame.

Features

• Bent by 30 degrees, the iron stays low over the board while the point still meets the lead squarely.
• Tip diameter of 0.2 mm, fine enough for individual leads on small SMD packages.
• The bend takes the hand out of the line of sight, so the joint stays visible while it is worked.
• Cartridge design with short recovery time, which matters given the low mass of a fine point.
• RoHS compliant according to the manufacturer.

Application, scope of delivery and compatibility

For repair on assemblies with tall components, for work on installed boards and for joints hidden from a straight approach, on the QUICK TS1 cordless iron rated 10 W over 100 to 420 °C. Scope of delivery, one soldering tip. Where access from above is clear, the straight SS1-I with the same point size will do.