What are Fetra cantilever transport trolleys and what industrial applications do they serve?

Fetra cantilever transport trolleys (Tragarmwagen) are specialized industrial transport carts designed for handling long, bulky materials in warehouses, manufacturing facilities, and distribution centers. These trolleys feature extending cantilever arms that support materials like steel profiles, pipes, lumber, and sheet goods without requiring full-length platform support. Primary applications include metal fabrication shops, construction material warehouses, furniture manufacturing, and aerospace component handling where conventional platform carts cannot accommodate oversized or irregularly shaped loads efficiently.

What are the key technical selection criteria for Fetra cantilever transport trolleys?

Selection of Fetra cantilever transport trolleys depends on platform dimensions, load capacity, and arm configuration requirements. Available platform sizes include 1200x800mm, 1600x800mm, and 2000x800mm variants like the Fetra 4624-1, 4625-1, and 4626-1 models respectively. Critical selection factors include maximum load capacity per cantilever arm, total platform load rating, wheel configuration for floor compatibility, and whether anti-roll safety features are required. Models with roll-off protection (Abrollsicherung) prevent cylindrical materials from falling during transport, essential for pipe and tube handling applications.

What standards and certifications apply to industrial cantilever transport trolleys?

Industrial cantilever transport trolleys must comply with EN 1757-3 standards for industrial trucks and material handling equipment safety requirements. Workplace safety regulations under EN ISO 12100 mandate risk assessment for mobile equipment used in industrial environments. German DGUV regulations specify load securing requirements and operator training standards for manual transport equipment. For facilities handling hazardous materials, ATEX compliance may be necessary, requiring ESD-safe construction and grounding provisions to prevent static discharge during material transport operations.

What are the differences between standard Fetra cantilever trolley variants and roll-off protection models?

Standard Fetra cantilever trolleys like the 4614, 4615, and 4616 series feature open cantilever arms suitable for flat materials and secure loads that won't shift during transport. Roll-off protection variants (mit Abrollsicherung) incorporate raised edges or containment barriers along the cantilever arms to prevent cylindrical materials like pipes, rods, or tubes from rolling off during movement. The -1 suffix models (4614-1, 4615-1, 4626-1) typically indicate enhanced load capacity or reinforced construction compared to base models, while maintaining identical platform dimensions of 800mm width across the range.

What installation and compatibility requirements exist for cantilever transport trolleys in industrial facilities?

Cantilever transport trolleys require smooth, level flooring with maximum 2% grade and obstacle-free aisles matching the trolley's turning radius plus load overhang clearance. Minimum aisle width should equal platform length plus 1000mm for safe maneuvering of 2000mm models. Wheel selection must match floor type, with polyurethane wheels for concrete, rubber for metal grating, and phenolic resin for chemical resistance. Integration with overhead crane systems requires coordination of lifting points and load distribution calculations to prevent structural damage during combined handling operations.

What safety ratings and operating parameters apply to industrial cantilever transport trolleys?

Industrial cantilever transport trolleys typically operate within temperature ranges of -20°C to +70°C for standard applications, with specialized high-temperature variants available for foundry operations up to +200°C. Load capacity ratings vary by model size, with 1200mm platforms typically rated for 1000-1500kg distributed loads and 2000mm variants handling up to 2500kg maximum capacity. Safety factors of 4:1 are standard for static loads, reduced to 2:1 for dynamic transport conditions. Wheel assemblies must meet minimum 150kg point load ratings with sealed bearings rated for continuous industrial duty cycles.

What maintenance schedule and inspection requirements are necessary for cantilever transport trolleys?

Cantilever transport trolleys require weekly visual inspections of wheel condition, bearing play, and structural integrity per DGUV regulations for mobile equipment. Monthly lubrication of wheel bearings and pivot points extends service life to 8-10 years under normal industrial usage conditions. Annual comprehensive inspections must document load test results, weld integrity, and dimensional accuracy within ±5mm tolerances. Immediate replacement criteria include wheel diameter reduction exceeding 10%, visible cracks in cantilever arms or platform structure, and bearing noise indicating imminent failure that could compromise load security during transport operations.

Fetra Support arm trolley

Fetra Trolley

Fetra Tragarmwagen are purpose-engineered cantilever-arm trolleys designed to transport and store long, bulky, or awkwardly shaped goods such as pipes, profiles, tubes, rods, and sheet material. Built on a welded steel frame with a load capacity of up to 500 kg per unit, each trolley features horizontal load-bearing arms spaced at adjustable intervals - typically 300-600 mm apart - allowing secure stacking of long workpieces without floor contact. Swivel castors with a diameter of 125-200 mm (including brake versions) ensure smooth handling across workshop floors, meeting the requirements of DIN EN ISO 9001 quality-controlled manufacturing environments.

As an authorised distributor of Fetra material-handling equipment, esd.equipment stocks the full Tragarmwagen range for immediate dispatch. Fetra products comply with relevant European workplace safety standards (BGV D27, EN 13155) and are manufactured to consistent tolerances in Germany. The Tragarmwagen series integrates seamlessly with other Fetra platform and shelf trolleys for a unified intralogistics concept.

Key technical advantages - Fetra Tragarmwagen at a glance

⚡ Up to 500 kg load capacity - welded steel frame with overload-resistant arm brackets

↕ Arm spacing 300-600 mm - adjustable horizontal arms for variable workpiece lengths

🛠 125-200 mm swivel castors - with locking brake, smooth rolling on hard floors

⚙ Modular arm count - 4 to 10 arms per trolley, adaptable to load geometry

🛡 EN 13155 / BGV D27 compliant - European workplace safety and load-securing standards

✓ German manufacturing - ISO 9001 quality control, powder-coat finish for corrosion resistance

Typical application areas: Mechanical engineering and metal fabrication (DIN EN ISO 9001, BGV D27), steel and aluminium profile storage (EN 13155), automotive production logistics (IATF 16949, VDA 6.3), warehouse and intralogistics operations (EN ISO 45001), carpentry and timber handling, HVAC pipe transport and staging

✓

Authorised Fetra Distributor Full Tragarmwagen range - Fetra cantilever, platform and shelf trolleys

📦

Stock & Fast Dispatch Items held in stock for immediate delivery to your facility

🛡

EN 13155 / BGV D27 European safety-compliant load handling and transport equipment