Torque wrench MANOSKOP 730/5 Fix 10-50 Nm insert tool holder 9 x 12 mm - Stahlwille 96503005

In series production every joint has to be tightened to the same torque. On the MANOSKOP 730/5 Fix the release torque is set once within 10-50 Nm (7-37 ft·lb) and then secured against adjustment: the adjustment knob can be unscrewed, and no change is possible without breaking the seal. Accuracy ± 3%.

Benefits

• Adjustment Lock: the adjustment knob can be unscrewed after setting, TORX Tamper Resistant locking screw and self-adhesive seals protect against tampering
• Fast, precise adjustment with QuickSelect quick adjustment, dual scale Nm/ft·lb
• Clicking type with dual stop signal, no reset to 0 required thanks to the low-wear bending bar system
• QuickRelease safety lock for the insert tools, counter-clockwise tightening by turning the insert tool over
• Clicking mechanism insensitive to continuous loads and counter-loads up to the maximum measuring range
• Easy adjustment without disassembly via 2 external adjustment screws, 2-component handle

Applications

Series assembly with constant tightening torque in industry and production, for example in aircraft engines, the automotive industry, rail, agricultural machinery, commercial vehicles and wind power.

Standards

Calibration certificate in accordance with DIN EN ISO 6789-2:2017.