Torque wrench Service/Series MANOSKOP 730/20 Fix 40-200 Nm insert tool mount 14 x 18 mm - Stahlwille 96503020

Assembly lines and repetitive production tasks call for a tool that is set once and then stays at the specified torque. The click-type MANOSKOP 730/20 Fix covers 40-200 Nm (30-150 ft·lb), accepts interchangeable insert tools through its 14 x 18 mm mount and works with an accuracy of ±3%.

Benefits

• Adjustment Lock: the adjustment knob can be unscrewed after setting the torque value. The included TORX Tamper Resistant locking screw and self-adhesive seals protect against tampering, no adjustment is possible without breaking the seal.
• Clicking type with dual stop signal, no reset to 0 required. The low-wear bending bar system is only under load when a force is applied.
• Fast, precise adjustment with QuickSelect quick adjustment and dual scale Nm/ft·lb.
• QuickRelease safety lock for the insert tools, counter-clockwise tightening by turning the insert tool over.
• Clicking mechanism insensitive to continuous loads and counter-loads up to the maximum measuring range.
• Easy adjustment without disassembly via 2 external adjustment screws, optimal calibration with perfectControl calibration systems No. 7794 or calibration systems No. 7706, 7791. With 2-component handle.

Applications

Series bolting with a constant tightening torque in industry and production, including aircraft engines, automotive industry, railways, agricultural machinery, commercial vehicles and wind power.

Standards

Calibration certificate in accordance with DIN EN ISO 6789-2:2017, accuracy ±3%.