Lower linear cutting wheel for Maestro 3-4M depaneling machines - Iteco 8930668

On depaneling machines with a linear support the scored panel rests on a fixed linear blade while the upper circular blade performs the separation. This spare part is the lower linear blade of the Maestro 3-4M and therefore a pure wear part that determines the cut over the whole length.

Operating features

• Clearly assigned to the Maestro 3-4M - the 2026 price list lists this item for that machine only, which rules out any mix up with the Tractor 2 blade.
• Fixed support over the full separation length - the blade carries the board, so its condition decides whether break edges stay straight and free of chip out.
• Wear part with a defined change interval - a blunt linear blade presses instead of separating and puts mechanical stress on components and solder joints near the border.
• No regrinding in the field - the cutting geometry is produced at the factory and is fully restored by replacing the blade.
• Matching upper part available - for the running edge Iteco lists the upper circular blade with bearing under 8930501 and in titanium under 8930509.

Technical data

Applications

Scheduled replacement of the lower linear blade on the Maestro 3-4M, recovery of cut quality after chipped scored edges, and stock keeping of a critical wear part in shops that depanel continuously.

Compatibility and scope of supply

According to the Iteco price list 2026 this item belongs to the Maestro 3-4M. The Tractor 2 and Tractor 2M use the linear blade 1030005, and the Tractor SEP1 uses the lower circular blade 8930513. Supplied as one linear blade without tools and without a mounting kit. Made in Italy.