Brushless Electric Screwdriver 1.0-4.5 Nm with Shockless Stand, 230 V, Push Start - HIOS VB-4504PSX

The HIOS VB-4504PSX is a brushless electric screwdriver for M3-M5 screws with a torque range of 1.0-4.5 Nm. It connects directly to 220-240 V and needs neither a power supply nor a controller. The shut-off clutch ends the fastening cycle at the set torque, and the brushless motor runs without carbon dust and with little maintenance.

Features

• Direct connection to 220-240 V, no separate power supply or controller required
• Steplessly adjustable torque 1.0-4.5 Nm with shut-off clutch
• Brushless motor, low maintenance and free of carbon dust
• Push start: the motor runs as soon as the screwdriver is pressed onto the screw
• Forward/reverse switch
• 1/4" hex bit holder (6.35 mm)
• Fixed 3 m cable
• Around 50 % lower power consumption and around 30 % less motor heating than earlier HIOS models (manufacturer data)
• Shockless stand included as torque reaction support

Application

For M3-M5 fastening with higher torque at low speed in device and subassembly production. The Shockless stand absorbs the reaction torque and relieves the operator during series work.

Compatibility

The HIOS HP-100 2025 torque meter is suitable for checking the set torque. The lever start version is available as VB-4504X, and VBH-1820PSX cover higher torques. No controller is required.