Brushless ESD Electric Screwdriver 0.2-1.2 Nm with Screw Counter - HIOS BLG-5000X ZERO1

The HIOS BLG-5000X ZERO1 is a brushless ESD electric screwdriver with 0.2-1.2 Nm and a built-in screw counter. The ZERO1 pulse system monitors every fastening and reports errors directly on the tool, without an external counter box.

Features

• Torque 0.2-1.2 Nm continuously adjustable, shut-off clutch
• Built-in screw counter and pulse system (ZERO1)
• Direct Teaching: drive 6 screws into the workpiece and the driver learns the motor pulses itself (limits +10 % / -10 %)
• Detects wrong or floating screws, cam-out, stripped threads and cross-threading
• Remaining count in the display (1-99 screws), green PASS and red FAIL LED, error codes 1-3
• Signal output via relay box BLOP-AF for PLC, signal lamp or buzzer
• ESD design, brushless motor
• Lever and push start, selectable via L/P switch
• Bit holder 1/4" hex (6.35 mm)

Application

For series assembly in electronics and precision mechanics where the number of screws and the quality of each joint must be verified. Suitable for machine screws M2.0-M3.0, tapping screws 2.0-3.0 mm.

Compatibility

Operates with the BLC-70-EU-HK controller (230 VAC, 20/30 VDC) and the 6-pin screwdriver cable RP50-CL (2 m). Signal output via relay box BLOP-AF. Screwdriver stands VMS-40 and VMS-50 with adapter VMS-0900-BLG45. Torque check with the HP-100 2025 tester. Variants with a different torque or speed range: BLG-5000X ZERO1-18 and BLG-5000X-ZERO-HT.