Images are examples, some edited with AI. The technical data are authoritative. AI notice
Soldering tip conical 0.51 mm SSC 600 series - Metcal SSC-622A
Metcal SSC 600 series soldering cartridge with a fixed tip temperature of 357 °C, so no calibration is required. The tip tapers conically to 0.51 mm and reaches joints even in densely populated areas. It fits the MFR-H6-SSC handpiece of the MFR-1160 and MFR-1161 soldering systems as well as the SP200 system.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
Temperature sensitive components do not tolerate an overheated tip. The SSC-622A cartridge of the SSC 600 series uses Metcal SmartHeat induction technology and holds the tip temperature constant at 357 °C, controlled by the Curie point of the heater layer instead of a sensor.
Benefits
- Fixed tip temperature of 357 °C with no calibration and no temperature setting
- 600 series for temperature sensitive applications and low thermal masses
- Conical geometry with 0.51 mm diameter and 11.4 mm tip length
- Fits the MFR-H6-SSC handpiece of the MFR-1160 and MFR-1161 soldering systems
- Can also be used on the SP200 soldering system
Applications
Fine soldering on SMD components, rework on densely populated boards, single pins, vias and wire ends, and repairs where there is little space between joints.
Compatibility and scope of delivery
The cartridge plugs directly into the MFR-H6-SSC handpiece and therefore suits the Metcal MFR-1160 and MFR-1161 soldering systems as well as the SP200 system. It can be changed during operation without tools and reaches working temperature within seconds. Scope of delivery is one SSC-622A soldering cartridge, order unit piece.
Technical data
| Item number | WL13817 |
|---|---|
| Model | SSC-622A |
| Manufacturer | Metcal |
| Manufacturer item number | SSC-622A |
| Order unit | piece |
| Product series | SSC 600 series |
| Tip length | 11.4 mm |
| Soldering tip diameter | 0.51 mm |
| Tip shape | conical |
| Tip temperature | 357 °C |
| Suitable handpiece | MFR-H6-SSC |
| Weight | 0.1 kg |
| Weight | 0.100000 |
| Manufacturer Nr. | SSC-622A |
| GPSR manufacturer information | OK International Ltd Eagle Close, Chandlers Ford GB-SO53 4NF Hampshire www.metcal.com |
| Condition of article | New |
| Article authenticity | Original product |
| Tip diameter/width [mm] | 0.510000 |
| Soldering tip shape | konisch |
| Series | SSC |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day. Ask a question