Images are examples, some edited with AI. The technical data are authoritative. AI notice
Desoldering cartridge STDC series 2.41/3.18 mm 412 °C - Metcal STDC-107
Through-hole components have to be released from the board without damaging the barrel or the pad. The STDC-107 desoldering cartridge of the STDC series works with a 2.41 mm inside diameter and a 3.18 mm outside diameter at a controlled tip temperature of 412 °C. It fits the MX-DS1 hand piece and suits standard desoldering work on through-hole components.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
Through-hole components have to be released from the board without damaging the barrel or the pad. The STDC-107 desoldering cartridge combines heater, sensor and suction channel in one part and delivers a repeatable 412 °C at the tip through SmartHeat control.
Benefits
- Inside diameter 2.41 mm for a close fit around the component lead
- Outside diameter 3.18 mm keeps the heat input to the pad contained
- Tip length 9.14 mm for short lever travel and clear sight
- SmartHeat control at 412 °C without calibration and without a temperature setting
- For the MX-500, MX-5000 and MX-5200 systems with the MX-DS1 hand piece
Applications
The cartridge is used for standard desoldering work on through-hole components in repair, rework and small batch production, for example when removing connectors, electrolytic capacitors, resistor networks and leaded semiconductors.
Compatibility and scope of delivery
The cartridge plugs into the MX-DS1 desoldering hand piece and runs on the MX-500, MX-5000 and MX-5200 power units. One STDC-107 desoldering cartridge is supplied per sales unit.
Technical data
| Item number | WL13848 |
|---|---|
| Model | STDC-107 |
| Manufacturer | Metcal |
| Manufacturer item number | STDC-107 |
| Sales unit | piece |
| Product series | STDC series |
| Inside diameter | 2.41 mm |
| Outside diameter | 3.18 mm |
| Tip length | 9.14 mm |
| Tip temperature | 412 °C |
| Compatible hand piece | MX-DS1 |
| Compatible systems | MX-500, MX-5000, MX-5200 |
| Weight | 0.1 kg |
| Manufacturer Nr. | STDC-107 |
| GPSR manufacturer information | OK International Ltd Eagle Close, Chandlers Ford GB-SO53 4NF Hampshire www.metcal.com |
| Condition of article | New |
| Article authenticity | Original product |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.
