Expanded metal prefilter for LRA 150 to LRA 250 - ULT 02.0.006

Anyone running a ULT solder fume extractor continuously knows how quickly the prefilter mats clog. The expanded metal filter 02.0.006 is placed ahead of the mat stage and holds back coarse particles, flux spatter, cooled sticky aerosols and fibres so the finer stages last longer.

Benefits

• Expanded metal prefilter made of knitted metal mesh, listed by ULT as a condensation filter with spark protection
• Cleanable in an industrial washer and therefore reusable, so unlike the mat stages it is not a consumable
• Relieves the M5 and F7 filter mats and the main filter, cutting mat consumption
• Sits ahead of the M5/F7 mat combination and the H13A combination filter cassette in the solder fume filter build
• Fits the LRA 150, LRA 200, LRA 220 and LRA 250 series
• Also suitable for the upper cassette of ACD 220-AS and ACD 250 FQ-AS
• Tool-free replacement inside the filter shaft of the unit

Applications

The expanded metal filter is used in electronics manufacturing and repair services wherever solder fume, adhesive vapour or laser smoke with a high coarse dust load is extracted. ULT also uses the expanded metal prefilter in the LAS laser fume units because it binds aerosols and particles before they reach the HEPA stage. It pays off most at busy hand soldering benches and during bonding and potting work.

Compatibility and scope of delivery

Suitable for the extraction units LRA 150, LRA 200, LRA 220 and LRA 250 and for the upper cassette of the ACD 220-AS and ACD 250 FQ-AS units. Supplied as one single expanded metal filter.