Images are for illustration purposes only and may differ from the actual product. Some images have been generated or edited, in whole or in part, using artificial intelligence systems. The technical specifications in the product description are authoritative.
Height-adjustable PCB holder that fixes the assembly at a defined distance above the PCT-1000 preheater. Two rails with sliding clips take different board formats and four posts with support pins keep the board flat. The gap to the heated surface therefore stays constant throughout the heat profile.
PCB holder height-adjustable for preheater PCT-1000 - Oki BH-1000
OKI
Original product
Net price (excl. VAT)
€378.59
Item
WL25235
Manufacturer no.
BH-1000
Personal expert advice
Brand new
Specialist dealer since 2009
Original product
Worldwide shipping
Product data
Manufacturer no.BH-1000
ConditionNew
Article
WL25235
Frequently Bought Together
-
This Item:
€378.59
-
Adapter for hot air nozzles, HCT-1000 system - Oki HNA-1
€359.25
-
Cleaning sponge with hole 80 x 52 mm yellow pack of 50 - Oki AC-YS3-P
€64.31
Total price
A heat profile is only repeatable if the board always sits at the same distance above the heated surface. The BH-1000 is a height-adjustable PCB holder for the PCT-1000 preheater that holds the assembly flat and free of stress.
Benefits
- Height adjustment for the correct gap to the PCT-1000 preheater
- Two rails with sliding clips for different board formats
- Four posts and support pins keep the board flat and low in warpage
- Flat-head supports avoid pressure marks on populated areas
- Two-handed work on the component because the assembly stays clamped
Technical data
| Item number | WL25235 |
| Model | BH-1000 |
| Manufacturer | OKI |
| Manufacturer item number | BH-1000 |
| Order unit | piece |
| Design | height-adjustable |
| Assembly | 4 posts, 2 rails with sliding clips, 4 support pins, flat-head supports |
| Weight | 0.1 kg |
Applications
Rework and repair on populated boards over a preheater, removal and placement of BGA and large-area SMD packages, and test or measurement work that needs the assembly held with free access.
Compatibility and scope of delivery
Intended as a separate board holder for the PCT-1000 preheater. The holder consists of four posts, two rails with sliding clips, four support pins and flat-head supports, order unit piece.
| Manufacturer Nr. | BH-1000 |
|---|---|
| Manufacturer | Oki |
| Weight | 0.100000 |
| GPSR manufacturer information | OK International Ltd Eagle Close, Chandlers Ford GB-SO53 4NF Hampshire www.metcal.com |
| Article authenticity | Original product |
| Condition of article | New |
Customers Who Bought This Item Also Bought
