Flux pen empty with conical nylon brush 14 x 4.3 mm - Lico BON-102

When flux has to reach one joint and not the whole board, the Lico BON-102 is filled with your own flux and dispensed straight at the work. The conical nylon brush, 14 mm long and 4.3 mm wide, releases only the amount the capillary action allows when you press it down.

Benefits

• Supplied empty, so it can be filled with the flux approved for your process
• Conical nylon brush 14 x 4.3 mm for precise application to pads and component leads
• Nylon bristles resist the usual soldering and cleaning media
• Dosing by pressure, no spillage as with an open flux jar
• Original BONKOTE product made in Japan

Technical data

Applications

Rework and repair on assembled boards, pre-wetting pads before resoldering, refreshing flux when desoldering SMD parts and when working with desoldering braid. Also useful in small series where flux is needed at single points only.

Compatibility and scope of delivery

The pen belongs to the BONKOTE BON-102 range, whose tips are available as spare parts. Delivery comprises one empty pen with the nylon brush fitted, flux not included.