Images are for illustration purposes only and may differ from the actual product. Some images have been generated or edited, in whole or in part, using artificial intelligence systems. The technical specifications in the product description are authoritative.
Larger solder eyes, holes and contact areas are covered with pre-cut 9 mm dots without any trimming. The polyimide dots resist up to 300 °C and are peeled straight off the roll. This bulk roll holds 10000 dots for series production.
Solder masking dots polyimide 9 mm 10000 pieces per roll - PPI TAP 7009/10.000
PPI Original product
Net price (excl. VAT)
€390.79
Item WL30550
Manufacturer no. TAP 7009 / 10.000
Personal expert advice
Brand new Specialist dealer since 2009 Original product Worldwide shipping
Product data
Manufacturer no.TAP 7009 / 10.000
ConditionNew
Article
WL30550
Frequently Bought Together
- This Item: €390.79
- Flux pen empty conical fine felt tip 9.5 x 4.5 mm - Lico BON-102B €17.75
- PCB insulating pen green 5 ml with Opti/Scan - Techspray 2509-GN €14.98
Total price
In series masking before wave soldering every saved hand movement counts. These brown-transparent polyimide masking dots of 9 mm diameter come pre-cut on the roll, fully cover larger solder eyes and holes and withstand process temperatures up to 300 °C. Total thickness including adhesive is 0.055 mm.
Benefits
- Pre-cut 9 mm diameter, no tape trimming required
- Temperature resistant up to 300 °C for wave soldering and reflow processes
- Total thickness of only 0.055 mm including adhesive
- Brown-transparent, the covered spot stays identifiable
- 10000 dots per roll as a bulk pack for series production
Technical data
| Item number | WL30550 |
| Model | 110-09 / 10.000 |
| Manufacturer | PPI |
| Manufacturer item number | TAP 7009 / 10.000 |
| Material | Polyimide |
| Diameter | 9 mm |
| Film thickness | 0.055 mm |
| Thickness incl. adhesive | 0.055 mm |
| Temperature resistance | up to 300 °C |
| Colour | brown-transparent |
| Order unit | Roll |
| Content unit | 10000 pieces |
| Weight | 0.1 kg |
Applications
Covering larger plated-through holes, solder eyes, test points and mounting holes before wave soldering or conformal coating. Also used for spot protection of contact areas during rework and repair.
Compatibility and scope of delivery
Delivered as one roll with 10000 polyimide masking dots of 9 mm diameter. Further diameters of the PPI TAP range are available for smaller holes and pads.
| Manufacturer Nr. | TAP 7009 / 10.000 |
|---|---|
| Manufacturer | PPI |
| Weight | 0.100000 |
| GPSR manufacturer information | PPI GmbH Hommericherstraße 10-14 DE-51789 Lindlar www.ppiadhesiveproducts.com/de |
| Article authenticity | Original product |
| Condition of article | New |
| Position sensing | No |
Customers Who Bought This Item Also Bought
