Images are for illustration purposes only and may differ from the actual product. Some images have been generated or edited, in whole or in part, using artificial intelligence systems. The technical specifications in the product description are authoritative.
Quad tip that wraps all four sides of a PLCC 20 package at once and lifts the part in a single move instead of working pin by pin. The cartridge is matched to temperature sensitive applications and keeps heat input correspondingly low. For the MX-H1-AVA and MX-RM3E hand pieces of the Metcal MX series.
Rework tip quad for PLCC 20 SMTC series - Metcal SMTC-012
METCAL Original product
Net price (excl. VAT)
€108.21
Item WL36532
Manufacturer no. SMTC-012
Personal expert advice
Brand new Specialist dealer since 2009 Original product Worldwide shipping
Product data
Manufacturer no.SMTC-012
ConditionNew
Article
WL36532
Frequently Bought Together
- This Item: €108.21
- Rework tip quad for QFP 100, 412 °C SMTC series - Metcal SMTC-143 €141.51
- Rework tip knife 4.83 x 16.51 mm 302 °C SMTC series - Metcal SMTC-5161 €71.89
Total price
Removing a PLCC package with a single tip takes time and loads the board thermally. The Metcal SMTC-012 is a quad rework tip for PLCC 20 that reaches all four lead rows at the same time and frees the component in one operation.
Benefits
- Quad geometry matched to the PLCC 20 package, all four sides reflow together
- Intended for temperature sensitive applications, heat input stays limited
- Heater and sensor inside the cartridge, so control responds the moment the tip lands
- For rework on surface-mounted components
- Compatible with the MX-H1-AVA and MX-RM3E hand pieces
Technical data
| Item number | WL36532 |
| Model | SMTC-012 |
| Manufacturer | Metcal |
| Manufacturer item number | SMTC-012 |
| Product series | SMTC series |
| Tip shape | quad |
| Component size | PLCC 20 |
| Suitable hand piece | MX-H1-AVA, MX-RM3E |
| Order unit | piece |
| Weight | 0.1 kg |
Applications
Removing and replacing PLCC 20 devices on printed circuit boards in repair, prototyping and field service, above all where neighbouring parts cannot take prolonged heating.
Compatibility and scope of delivery
The cartridge belongs to the SMTC series and is fitted to the MX-H1-AVA and MX-RM3E rework hand pieces of the Metcal MX systems. One tip is supplied.
| Manufacturer Nr. | SMTC-012 |
|---|---|
| Manufacturer | Metcal |
| Weight | 0.100000 |
| GPSR manufacturer information | OK International Ltd Eagle Close, Chandlers Ford GB-SO53 4NF Hampshire www.metcal.com |
| Article authenticity | Original product |
| Condition of article | New |
| Position sensing | No |
Write Your Own Review
Customers Who Bought This Item Also Bought