Soldering tip chisel bent 30° 1.5 mm T series - Thermaltronics TM60CB226

Bent chisel tips keep the hand piece body flatter over the board and give access to joints hidden by neighbouring components. The Thermaltronics TM60CB226 combines a 30° bend with a 1.5 mm wide chisel face on a 12 mm tip. The working temperature of 325-358 °C is established by Curie point regulation.

Benefits

• 30° bent geometry for a flat approach angle and better sight of the joint
• 1.5 mm chisel face transfers heat over a broad area, well suited to drag soldering pin rows
• Self-regulating Curie point heating at 325-358 °C with no recalibration
• 12 mm tip length for access between densely populated parts
• RoHS compliant and suitable for lead-free processing

Applications

Drag soldering of QFP and SOIC pin rows, soldering underneath low-profile components, rework on header strips and any job where the hand piece must stay flat over the assembly.

Compatibility and scope of delivery

T series soldering cartridge for the SHP-T hand piece and the Thermaltronics TMT-5000S-1 and TMT-5000S-2 soldering stations. One cartridge is supplied, without hand piece or station.