Soldering tip sharp bent 30° 0.4 mm short T series - Thermaltronics TM60SB275

Detail work on single terminations goes best when the tip stays short and the hand piece does not block the line of sight. The TM60SB275 is a bent conical cartridge at 30°, with a 0.4 mm point and a short 8.4 mm tip length, in the 325-358 °C band.

Benefits

• 30° bent point of 0.4 mm for single terminations and corrections
• Short 8.4 mm tip length for a direct heat path and steady tip control
• Bent shape leaves the joint in view when working under a loupe or microscope
• Fixed 325-358 °C working band from the Curie point heater
• Lead-free and RoHS compliant

Applications

Precise soldering of individual SMD terminations, removing small solder bridges, track repair and rework where the tip is applied at an angle from above.

Compatibility and scope of delivery

Fits the SHP-T hand piece on the TMT-5000S-1 and TMT-5000S-2 soldering stations. Scope of delivery is one soldering cartridge.