Soldering tip conical 0.5 mm long 15.4 mm T series - Thermaltronics TM80CS155

Between the 0.4 mm needle and the 1.0 mm all-rounder there is often no intermediate size with real reach. The TM80CS155 covers that gap with 0.5 mm at the working point on a 15.4 mm tip and operates in the T series range of 420-475 °C.

Benefits

• Working point 0.5 mm (0.02 in) as an intermediate size for fine pads that still need heat
• Long geometry of 15.4 mm (0.61 in) for recessed or obscured joints
• Curie controlled cartridge, steady 420-475 °C without manual temperature setting
• Heater and sensor sit inside the cartridge, tool-free change on the SHP-T
• RoHS compliant and usable with lead-free alloys

Applications

Rework on fine pitch parts inside populated assemblies, soldering in cavities and cut-outs, work on sensor and camera modules and repairs on boards surrounded by tall components.

Compatibility and scope of delivery

For the SHP-T hand piece with the TMT-5000S-1 and TMT-5000S-2 soldering stations. One tip is supplied.