Soldering tip hoof shape 60 degrees 3.3 mm drag soldering T series - Thermaltronics TM70DS525

In drag soldering along long pin rows the amount of solder the tip carries decides the result. The TM70DS525 hoof tip with its 60 degree face and 3.3 mm width holds a generous solder reservoir and releases it evenly as it is drawn across the pins. Tip length is 17.9 mm and the Curie point heating of the T series works in the 350-398 °C band.

Benefits

• 60 degree hoof face 3.3 mm wide, made for drag soldering QFP and SOIC rows
• Large wetted area picks up plenty of solder and reduces bridging
• 17.9 mm tip length gives good access at a shallow working angle
• Fixed working temperature of 350-398 °C via the Curie point, no calibration
• RoHS compliant and designed for lead-free alloys

Applications

Drag soldering fine-pitch devices, rework on connector strips, soldering pads and shielding frames and clearing solder bridges on SMD rows.

Compatibility and scope of delivery

The cartridge fits the SHP-T hand piece and runs on the TMT-5000S-1 and TMT-5000S-2 soldering stations. Scope of delivery: one soldering tip.