Soldering tip conical 0.5 mm, short 5 mm body, T series - Thermaltronics TM80C301

The shorter the tip, the less temperature is lost between heater and joint. The TM80C301 exploits exactly that with a 0.5 mm point on a 5 mm tip length, intended for joints where fine long tips run out of steam.

Benefits

• Tip length of only 5 mm, short heat path from heater to point
• 0.5 mm point diameter for individual pins and pads
• Reserve for joints with high heat dissipation such as ground planes
• Steady 420-475 °C thanks to the Curie controlled heater
• Lead-free build, RoHS compliant

Applications

Soldering on ground planes and shields, heavy through hole terminals, boards with thick copper layers, rework on power electronics.

Compatibility and scope of delivery

Fits the SHP-T hand piece and therefore the Thermaltronics TMT-5000S-1 and TMT-5000S-2 induction soldering stations. Delivery covers one cartridge, the heating element is built in and is replaced together with the tip.

The cartridge is RoHS compliant and lead-free, which makes it suitable for the usual SAC lead-free solder alloys.