Soldering tip chisel 30° 1.6 mm T series 325-358 °C - Thermaltronics T60CH016

Plated-through holes and terminations tied into copper draw heat away quickly. The T60CH016 answers that with a 1.6 mm chisel face ground to 30°, which transfers more energy per second while the temperature can never rise above the Curie point of the T series.

Benefits

• 1.6 mm chisel face with noticeably more heat capacity than narrower shapes
• Working temperature physically limited to 325-358 °C, no overheating of the assembly
• 30° grind usable flat or on the edge
• Tip length of 13 mm, the same geometry as the other T cartridges in this range
• RoHS compliant and lead-free

Applications

Through-hole assembly on multilayer boards, soldering pin headers and terminal blocks, tinning stranded wire and solder tags, and service work on power supplies and power assemblies.

Compatibility and scope of delivery

The cartridge runs in the SHP-T handpiece on the TMT-5000S-1 and TMT-5000S-2 stations. One soldering tip is supplied per order unit.