ESD tote box IDP-STAT, dissipative, red, 300 x 200 x 120 mm - Warmbier 5311.R.05

Components are just as exposed in storage and on the trolley as they are at the bench. This tote box is moulded from dissipative polypropylene throughout and shows a typical resistance of 10^9 - 10^10 ohms, so charges drain off in a controlled way instead of leaving in a single spike.

Advantages

• The dissipative behaviour belongs to the material: IDP-STAT is an inherently dissipative polymer, the effect sits in the bulk and not in a surface coating.
• Typical resistance of 10^9 - 10^10 ohms, slow enough a discharge for sensitive assemblies.
• Internal dimensions of 270 x 170 x 117 mm within external dimensions of 300 x 200 x 120 mm, usable volume without overhang on the shelf.
• Pallet module footprint and stackable design, several boxes can be built up into one load unit.
• Coloured red right through and marked with the ESD symbol, easy to tell apart from a standard box on the rack.

Application

Storage and in-house transport of printed circuit boards, populated assemblies, connectors and small parts inside the EPA. The box suits picking stations, test areas and buffer stores where material has to be presented in an ESD-safe manner.