Z-Line filter cassette G4 prefilter series 160 and 200 - ULT 02.1.570

In the compact extraction units of the 160 and 200 series the installation space is tight and filter area is therefore precious. The Z-Line filter cassette G4 uses Z shaped pleating to provide a large face area in a small volume and works there as the first stage ahead of the main and adsorption filters.

Benefits

• Filter class G4, classified by ULT as ISO Coarse 90 percent to ISO 16890
• Z pleating with high effective area despite the compact cassette dimensions
• Large holding volume for coarse dust, which stretches the change intervals
• Stops the downstream H13 main filter stage from clogging early
• Lowers replacement filter cost per operating hour because the expensive main stage lasts longer
• One cassette for LRA 160 and LRA 200, so fewer spare part variants on the shelf

Why a prefilter

The upstream Z-Line filter holds back most of the incoming particles. Its special pleating provides a large volume for coarse dust, while the large filter area also separates fine dust at high raw gas flow rates. Prefilter elements stop the following H13 main filter element from clogging early. Changed at short intervals, they keep the main filter stage working for a long time.

Applications

Solder fume extraction at single workplaces and capture of light dust and process vapours in electronics manufacturing, test areas and training workshops running ULT 160 and 200 series units.

Compatibility and scope of delivery

Suitable for the ULT extraction units LRA 160 and LRA 200. One Z-Line filter cassette is supplied per order unit.