Soldering tip tester 3-in-1 up to 600 °C with USB - Thermaltronics TMT-ST10

Documenting a soldering process needs three readings taken at the same tip: temperature, leakage resistance to ground and voltage potential. The Thermaltronics TMT-ST10 combines all three checks in one battery-powered handheld unit.

Benefits

• Temperature measured directly at the tip over a 0-600 °C range using replaceable sensors
• Leakage resistance test from 0-100 ohm and tip AC voltage test from 0-100 mV
• Internal memory for 32,640 measurement events, read out and exported over mini USB
• Powered by a 9 V block battery, so it can be used at the bench without a mains outlet
• Compact housing of 85 x 175 x 48 mm at a weight of 0.35 kg

Applications

Periodic verification of soldering stations in electronics manufacturing, recording temperature profiles of individual tips, proving the earthing of the handpiece at ESD workstations and fault finding when joints stay cold despite a correct set temperature.

Compatibility and scope of delivery

The instrument tests soldering tips regardless of the station brand. The delivery includes the TMT-ST10 tester, the ST-CABLE-1 mini USB data cable, ST-SNSR-1 temperature sensors in a pack of 10 and the ST-GWIRE-X earthing wire.