ESD solder fume extraction 180 m³/h with HEPA H13 for four stations - JBC FAE1-2B

The FAE1-2B extracts solder fume right at the joint and moves up to 180 m³/h at 3200 Pa of vacuum. Because extraction only starts once soldering actually happens, noise stays at 55 dBA and the filters last longer.

Key benefits

• Air flow up to 180 m³/h and 3200 Pa of vacuum pull fume and particles away at source instead of spreading them through the room.
• Compact filter with an H13 particle stage to EN 1822 plus an activated carbon stage holds back fine dust and odours.
• A vacuum system in the stand detects that the tool is parked and regulates extraction on its own, which saves energy and filter life.
• Up to four soldering or rework stations connect directly through the Station 1 to 4 RJ12 ports.
• Four operating modes, automatic with JBC stations, continuous, pedal and RS-232 remote control, plus four settings for intake flow.
• ESD safe construction drawing 110 W at 230 V, 10.5 kg in weight on a 380 x 340 x 475 mm footprint.

Technical data

Applications

Electronics manufacturing, repair and service areas, laboratories and test benches, wherever soldering runs continuously at ESD protected workstations.

Compatibility and scope of delivery

Ports for four stations over RJ12, a robot port on RJ12, RS-232 for remote control, a pedal input and USB-B for firmware updates. Optional tool control through the P-005 pedal. The delivery includes the FAE1-110 pre-filter and the FAE1-100 compact filter.

Standards and compliance

H13 class particle filter to EN 1822. The manufacturer property table lists the unit as ESD safe.