Permastat ESD cushion pouches 100 x 150 mm + 50 mm flap, 500 pieces - Warmbier 3151.360

Packing small parts one by one costs time at the bench when every pouch has to be cut and sealed. These cushion pouches arrive ready made at 100 x 150 mm with a 50 mm flap and are dissipative, typically 10^10 - 10^11 Ohm.

Benefits

• Ready-made pouch in 100 x 150 mm, so there is no cutting and no sealing at the packing bench.
• Flap of 50 mm, the pouch folds over and is secured with a label, without extra material.
• Dissipative with a typical bleeder resistance of 10^10 - 10^11 Ohm, charges drain in a controlled way.
• Three-layer polyethylene build with a film thickness of 120 µm and smooth outer and inner layers.
• Unprinted, while the pink colour still identifies the material as ESD packaging at a glance.
• Sales unit of 500 pieces, single-material polyethylene and therefore recyclable.

Technical data

Application

Individual packaging for boards, connectors, sensors and spare parts inside the EPA, order picking and transport between workstations. The cushioning also covers mechanical protection, so a separate bag is not needed. Goods leaving the EPA belong in a shielding pouch.