Punch lock riveter for dry wall sections up to 1.2 mm sheet thickness, burnished, 340 mm - Knipex 90 42 340

Anyone erecting partition walls and drop ceilings joins hundreds of section joints per day, often well behind the edge of the section. The punch lock riveter 90 42 340 makes that joint without a screw and without a rivet and reaches deep-seated joints thanks to its 340 mm length.

Benefits

• Firm connection of metal sections without screws and without rivets, no protruding head is left to disturb the boarding.
• Designed for U- and C-shaped sections with a maximum of 1.2 mm sheet thickness, that is two layers of 0.6 mm each.
• Minimum hand force required due to the optimum lever transmission, which counts over many joints in a row.
• 340 mm overall length, giving more reach than the 250 mm version 90 42 250.
• Burnished tool with multi-component grips, weight 901 g.
• Spare punch 90 49 340 and spare die 90 49 340 M are available for this tool, so it stays in service once the edges are worn.

Areas of use

Dry walling when erecting partition walls and drop ceilings, interior fit-out and shop fitting. The long version pays off wherever the joint is not at the edge of the section and a short tool no longer reaches. For work close to the edge the handier version 90 42 250 is available.

Standards and conformity

The manufacturer does not state a tool standard for this product. According to the manufacturer the tool contains no substances of very high concern under REACH. The RoHS directive does not apply.