Crimping pliers for insulated and non-insulated terminals to DIN 46234, 240 mm, in sales packaging - Knipex 97 32 240 SB

In one and the same installation insulated terminals often sit on the control side while non-insulated crimp terminals go on studs and clamps. The 97 32 240 SB crimping pliers cover both connector types with a single tool and also cut and strip the conductor at the same working position.

Benefits

• For crimping insulated terminals and insulated heat shrinkable sleeve connectors as well as non-insulated crimp terminals to DIN 46234.
• Cable cutter and stripping holes in the same tool, so no tool change is needed.
• Threaded holes for cutting copper and brass screws threaded M 2.6 / M 3 / M 3.5 / M 4 and M 5.
• Bolted joint for high stability and even movement.
• Pliers painted black with multi-component grips, 240 mm lever length according to the catalogue entry.
• Self-service blister card, so the item is ready for shelf and counter sales.

Areas of use

Control cabinet and control system building, machine and plant construction, vehicle electrics and maintenance, wherever insulated and non-insulated connectors are processed side by side.

Packaging

SB stands for the self-service pack. Tool and design correspond to the base version 97 32 240, the difference is the packaging alone.

Standards and note on the technical data

According to the manufacturer the profiles for non-insulated terminals are matched to DIN 46234, which is a standard for the terminals and not a test standard for the tool. The manufacturer does not publish a separate data sheet page for this packaging version, so binding individual values such as EAN, weight, dimensions and the crimping ranges in square millimetres and AWG are not listed here.