Crimping pliers for non-insulated crimp terminals to DIN 46234, 0.5 to 6.0 mm², 230 mm - Knipex 97 21 215 C

Non-insulated crimp terminals only hold when the barrel is deformed evenly. The 97 21 215 C crimping pliers press terminals and connectors to DIN 46234 in three nests from 0.5 to 6.0 mm², and they also cut and strip the conductor at the same working position.

Benefits

• Three crimping nests for non-insulated crimp terminals to DIN 46234 from 0.5 to 6.0 mm², matching AWG 20 to 10.
• Cable cutter and stripping holes in the same tool, so no tool change is needed.
• Threaded holes for cutting copper and brass screws threaded M 2.6 / M 3 / M 3.5 / M 4 and M 5.
• Bolted joint for high stability and even movement.
• Multi-component grips on the handles for a secure hold over the 230 mm lever length.

Areas of use

Control cabinet building, machine and plant construction, vehicle and on-board electrics and maintenance work, wherever non-insulated crimp terminals to DIN 46234 are fitted to terminals and studs.

Standards and conformity

The crimping profiles are matched to non-insulated crimp terminals according to DIN 46234. The manufacturer does not state a tool standard. According to the manufacturer the pliers contain no substances of very high concern under REACH, and the RoHS directive does not apply.