Crimping pliers for non-insulated open connectors 4.8 and 6.3 mm, two-hand operation, 250 mm, self-service pack - Knipex 97 52 05 SB

Non-insulated open connectors need a cleanly formed crimp, otherwise contact resistance suffers. Crimping pliers 97 52 05 SB work with precision dies for tabs 4.8 and 6.3 mm wide, and their lever transmission cuts the hand force required by up to 30 percent compared with regular crimping pliers.

Benefits

• Lever transmission takes up to 30 percent off the hand force, which tells on every further joint.
• Precision dies and an unlockable ratchet keep crimping quality constant across a whole series.
• Crimping pressure is set and calibrated at the factory, so there is nothing to adjust on site.
• Two-hand operation makes crimping large conductor cross-sections easy on the hands.
• A balanced centre of gravity, an angled head and ergonomically shaped handles give secure handling at 250 mm overall length.
• The crimping die is fixed and not exchangeable, so the tool stays calibrated to its connector format.

Areas of use

Vehicle and trailer electrics, machine and plant wiring, repair of wiring harnesses and control cabinet building, wherever non-insulated blade terminals and receptacles of 4.8 or 6.3 mm tab width are processed. The SB version is aimed at shelf and counter sale.

Note on the technical data

The manufacturer publishes no separate data page for the SB version. It differs from the base version 97 52 05 in the self-service packaging. As weight, dimensions and EAN of the packed variant are not documented, this description deliberately carries no table of individual values. Overall length and tab widths are taken from the catalogue designation.