Crimping pliers for coaxial, BNC and TNC connectors, RG 58 to RG 223, short design, 195 mm - Knipex 97 52 20

At the antenna distributor every centimetre of working room counts, and a coaxial plug crimped too loosely only shows up in service. Crimping pliers 97 52 20 press coaxial, BNC and TNC connectors with three nests at crimp widths of 5.4 mm, 6.48 mm and 1.72 mm, and do so in a short 195 mm body.

Benefits

• Three nests at 5.4 mm, 6.48 mm and 1.72 mm cover the outer ferrule, the intermediate size and the centre pin, so no change of tool is needed.
• Laid out for cable types RG 58, 59, 62, 71 and 223, which covers the common coaxial range.
• Precision dies and an unlockable ratchet keep crimping quality constant across a whole series.
• Crimping pressure is set and calibrated at the factory, so nothing has to be readjusted.
• The head angled by 20° keeps the crimping zone in view and makes work inside a wall box easier.
• Short design at 195 mm and only 380 g, so the tool stays controllable even overhead.

Technical data

Areas of use

Antenna and video technology, radio and measurement work, network and security installations, and service in outlet boxes and distribution cabinets. The short design pays off wherever there is little room to swing the pliers.

Standards and conformity

The manufacturer states no tool standard for this product. According to the manufacturer the pliers contain substances of very high concern under REACH. The RoHS directive does not apply. The crimping die is fixed and cannot be exchanged.