Positioning aid for the 97 52 14 crimping pliers, 20 x 10 mm, 10 g - Knipex 97 59 14

With small contacts the position in the die decides the quality of the joint, and that position is hard to hold by hand. The 97 59 14 positioning aid is the matching accessory for the 97 52 14 crimping pliers and weighs only 10 g at dimensions of 20 x 10 mm.

Benefits

• Accessory made specifically for the 97 52 14 crimping pliers, with no fitting and no improvising needed.
• Very small and light part at 20 x 10 mm and 10 g, it takes up no space in the tool case.
• Available as a separate item, so the pliers stay usable if the aid is lost or worn.
• According to the manufacturer it is free of substances of very high concern under REACH.

Areas of use

The item belongs to the 97 52 14 crimping pliers in the short design. According to the manufacturer those pliers work with precision dies and an unlockable ratchet mechanism, the crimping pressure is calibrated at the factory, and the head angled by 20 degrees together with the short design and the low weight gives good handling. The positioning aid is used wherever these pliers are run in series in control and equipment building.

Standards and conformity

The manufacturer does not state a tool standard for this accessory. According to the manufacturer it contains no substances of very high concern under REACH. The RoHS directive does not apply.