Flexible extraction hose Ø 75 mm, 10 m, black, for extraction units and arms - Donaldson Bofa 1UA1080020 / 10 METER

Between the capture point and the extraction unit, the ducting decides how much airflow actually arrives. This flexible extraction hose with a diameter of 75 mm comes cut to 10 m and connects an extraction arm, hood or nozzle to the unit. Ten metres also connect a centrally placed unit to the capture point at the bench.

Benefits in use

• Diameter of 75 mm, matching extraction arms, hoods, nozzles and spigots with a 75 mm connection from the Bofa range.
• Routes flexibly along a bench, a machine frame or a cable duct without losing its cross section.
• Supplied cut to 10 m, so there is no trimming before installation and no offcut to pay for and dispose of.
• Black finish, discreet at dark workstations and on machine enclosures.
• Sales unit of 1 piece, which lets you order exactly what each capture point needs.

Technical data

Applications

Solder fume extraction on single and multi station systems, laser fume extraction on marking and cutting machines and dust extraction at manual workplaces. On long runs it pays to check the reserve of the unit, because every additional metre costs pressure. The hose serves as the link between unit and capture element or as an extension of an existing run.

Compatibility and scope of delivery

Suitable for extraction units and accessories with a 75 mm connection. Delivery includes one hose of 10 m. Hose clamps, cuffs, reducers and nozzles are not included and are available in the same accessory range.