WXUPS MS ultra soldering iron set 150 W, 24 V, Active-Tip, MIL-SPEC - Weller T0052923799

Very large components and multilayer boards pull heat out of the joint before the solder flows. The WXUPS MS answers with 150 W at 24 V through the Active-Tip cartridge right behind the tip, heating up in 7 seconds. The temperature sensor sits close to the tip and holds the setpoint within +/- 2 °C.

Benefits in use

• Maximum power of 150 W at 24 V, with Thermal Core technology carrying the heat through the joint.
• Heat-up time of 7 seconds and a short recovery, so the rhythm at the bench is kept.
• Short tip to grip distance for a steady hand on precise joints.
• An RGB ring light on the tool shows the connected channel at a glance and the colour can be chosen freely.
• Smart tips of the RTUS MS series with an integrated chip supply a complete calibration history.
• Temperature accuracy of +/- 9 °C and stability of +/- 2 °C across the 100 to 450 °C range.

Applications

Electronics manufacturing, repair and test benches with large components, power devices, connectors and ground planes. It also suits multilayer boards with high heat dissipation.

Compatibility

The matching tip series is RTUS MS. The manufacturer specifies the Weller T0053451699 control unit. The sales unit is one set, and the manufacturer table does not detail the exact scope of delivery.

Standards and compliance

The tool is ESD safe. The manufacturer lists it under the MIL-SPEC specification.