WATC100 automatic soldering tip cleaner with fibre brushes, ESD safe, 50 W - Weller WATC100F

Fine tip geometries do not take a hard brush. The fibre brushes of the WATC100 remove oxide and solder residue in one second while sparing the plating of the tip. The brushes start automatically as soon as the tip enters and the residue stays in the collecting cup.

Benefits in use

• Cleaning in one second, and the residue stays inside the unit instead of on the bench.
• Fibre brushes with a high melting point work gently on fine tips and plated cartridges.
• Careful tip conditioning extends tip life twofold against manual cleaning according to the manufacturer.
• Automatic on and off activation, a light bar for the operating mode and LED illumination inside the brushes.
• Tool free brush change and a hygienically emptied collecting cup keep maintenance short.
• ESD safe housing measuring 141 x 110 x 131 mm, connection 24 V at 50 W.

Applications

Hand soldering benches in electronics manufacturing, repair, test and laboratory. It suits fine tip geometries and work under the microscope in particular.

Compatibility

Usable for soldering tips and desoldering tweezers. The splash guard comes in black and grey, which allows leaded and lead free solder to be told apart at the bench. Operating voltage 24 V, power input 50 W.

Standards and compliance

The housing is ESD safe and therefore suitable for EPA areas in production. Permitted ambient temperature is -10 to 45 °C.