Sandflex bi-metal hacksaw blade 300 x 13 mm, 24 TPI for metal - Bahco 3906-300-24-100

In hand cutting the tooth pitch decides both the cut face and the service life. The Sandflex blade 3906-300-24-100 works with 24 teeth per inch over a 300 mm blade length and combines a high alloy super HSS tooth edge with a spring steel back.

Benefits in use

• The medium 24 teeth per inch pitch covers most workshop cuts, from tube through angle section to thin solid stock.
• Bi-metal build with a hard tooth edge and a tough spring steel back, the blade is practically unbreakable and splinter free.
• Precision ground teeth, the cut runs smoothly and the edge holds over many cuts.
• Blade size 300 x 13 x 0.65 mm, the standard format for hacksaw frames with a 300 mm span.
• High flexibility, the blade tolerates side loading better than a fully hardened blade.

Applications

Metalwork shops, pipework, maintenance and assembly, electrical installation and vehicle work, wherever tube, angle section and thin solid stock are cut by hand.

Notes

As a rule of thumb at least three teeth must remain in the cut. The manufacturer states no standards for this blade, and the property table lists no ESD capability to IEC 61340-5-1.