Sandflex bi-metal hacksaw blade 300 x 13 mm, 18 TPI for metal - Bahco 3906-300-18-100

In hand cutting the tooth pitch decides both the cut face and the service life. The Sandflex blade 3906-300-18-100 works with 18 teeth per inch over a 300 mm blade length and combines a high alloy super HSS tooth edge with a spring steel back.

Benefits in use

• The coarse 18 teeth per inch pitch clears the chip quickly and is intended for solid stock and thick walled sections.
• Bi-metal build with a hard tooth edge and a tough spring steel back, the blade is practically unbreakable and splinter free.
• Precision ground teeth, the cut runs smoothly and the edge holds over many cuts.
• Blade size 300 x 13 x 0.65 mm, the standard format for hacksaw frames with a 300 mm span.
• High flexibility, the blade tolerates side loading better than a fully hardened blade.

Technical data

Applications

Metalwork shops, pipework, maintenance and assembly, electrical installation and vehicle work, wherever solid stock and thick walled sections are cut by hand.

Scope of delivery

One Bahco 3906-300-18-100 bi-metal hacksaw blade, 300 mm, 18 teeth per inch.

Notes

As a rule of thumb at least three teeth must remain in the cut. The manufacturer states no standards for this blade, and the property table lists no ESD capability to IEC 61340-5-1.