Images are for illustration purposes only and may differ from the actual product. Some images have been generated or edited, in whole or in part, using artificial intelligence systems. The technical specifications in the product description are authoritative.
After a component has been removed, residual solder stays on the pad. The D530012 desoldering tip of the D530 series carries a slot in its contact face that lets the suction air reach the molten solder and draw it off. Inner diameter 0.8 mm, outer diameter 1.8 mm.
Desoldering tip for pad cleaning inner Ø 0.8 mm outer Ø 1.8 mm for DT530 - JBC D530012
JBC
Original product
Net price (excl. VAT)
€27.03
Item
WL85013
Manufacturer no.
D530012
Personal expert advice
Brand new
Specialist dealer since 2009
Original product
Worldwide shipping
Product data
Manufacturer no.D530012
Country of originSpain
ConditionNew
Article
WL85013
Frequently Bought Together
-
This Item:
€27.03
-
Soldering tip conical, bent, D 0.3 mm, for chips - JBC C120-902
€37.10
-
Special-form desoldering tip 15.6 x 14.3 mm for SMD - JBC C420286
€142.66
Total price
A pad covered with residual solder will not take a new component cleanly. The D530012 sits flat on the pad and guides the suction air through a slot in the contact face to the molten solder, with an inner diameter of 0.8 mm. The pad is cleared in a single step without smearing solder.
What the tip delivers in practice
- Slotted contact face, the suction air reaches the residual solder even with the tip lying flat.
- Inner diameter 0.8 mm and outer diameter 1.8 mm, matched to pads of this size range.
- The pad is cleared in one pass, follow up work with desoldering braid is usually not needed.
- Short contact times protect the pad and the solder resist.
- D530 series for the DT530 desoldering iron, changed without altering the station setup.
Technical data
| Length incl. packaging | 95 mm |
|---|---|
| Width incl. packaging | 45 mm |
| Height incl. packaging | 5 mm |
| Sales unit | 1 piece |
| Content unit | 1 piece |
| Battery included | no |
| Inner diameter (desoldering tip) | 0.8 mm |
| Tip type | Desoldering tip |
| Tip series | D530 |
| Application | Pad cleaning |
| Outer tip diameter | 1.8 mm |
| Tip geometry | S1 |
| Matching handpiece | DT530 |
| ESD safe | no |
Applications
Preparing pads before reassembly, repair and rework on printed circuit boards, service benches in electronics manufacturing and maintenance.
Compatibility and scope of delivery
The tip belongs to the D530 series and works on the DT530 desoldering iron. One piece in geometry S1 is supplied.
| Manufacturer Nr. | D530012 |
|---|---|
| Manufacturer | JBC |
| Country of Manufacture | Spain |
| Weight | 0.100000 |
| Sales unit | 1 Stück |
| GPSR manufacturer information | JBC Soldering SL, Ramón y Cajal 3, ES-08750 Molins De Rei, www.jbctools.com |
| Article authenticity | Original product |
| Condition of article | New |
Accessories from our range
Customers Who Bought This Item Also Bought
Complementary products
Check items to add to the cart or
