ESD guide kit for solder wire Ø 0.9 to 1.0 mm without perforation - JBC GALE10D-B

With automatic wire feed, the guide decides whether the wire reaches the joint cleanly and without jamming. Guide kit GALE10D-B is matched to solder wire of 0.9 to 1.0 mm diameter without perforation and comes with all the wheels and nozzles a changeover needs, alongside the guide set itself. The guide tube measures 126 cm.

What the kit delivers

• Matched to solder wire from 0.9 to 1.0 mm, so the wire runs through the feed without slip and without jamming.
• A complete set with inlet nozzle, drive wheel, support wheel, counter wheel, intermediate nozzle and outlet nozzle, every wear part of a changeover in one pack.
• The guide set is changed according to the solder wire in use, with no conversion of the station.
• A guide tube of 126 cm lets the wire spool stand away from the working surface.
• ESD safe according to the property table, so usable inside an EPA without extra measures.

Technical data

Applications

• Converting an automatic soldering station to solder wire of 0.9 to 1.0 mm
• Replacing worn guide and drive parts in series soldering
• Stock keeping for sites running several wire diameters in parallel

Compatibility and scope of delivery

The manufacturer names the ALE250 and ALE stations as matching. The kit is designed for solder wire without perforation. For perforated wire the manufacturer lists separate sets of the GALE range. Solder wire itself is not part of the delivery.

Standards and compliance

The manufacturer property table rates the kit as ESD safe. The manufacturer is JBC Soldering SL in Spain.