Guide kit with wire perforation for ALE250, solder wire Ø 0.8 mm - JBC GALE08V-B

During automatic feeding, trapped flux tends to burst open and throw solder onto the assembly. This guide kit places a small blade in the feed path that perforates the solder wire down to the flux core. Flux escapes in a measured way, the soldering process stays free of splashes, and the 126 cm guide tube lets the wire reel sit away from the work area.

Key benefits

• A blade perforates the solder wire as it is fed, down to the flux core, which improves flux flow and degassing.
• Dimensioned for single core solder wire of 0.8 mm diameter, other diameters have their own kits.
• Guide tube of 126 cm length, so the wire reel can stand outside the immediate work area.
• Supplied with inlet nozzle, intermediate nozzle, outlet nozzle, feed and counter wheel plus blade holder and blade, a complete set for a changeover.
• Listed as ESD safe in the property table, suitable for workplaces run under an ESD programme.

Applications

Automated and semi automated soldering with the ALE250 automatic iron, for example on connectors, transformers and power components in series production.

Compatibility and scope of delivery

Intended for the ALE250 and the ALE range. The set contains one guide set, one inlet nozzle, one feed wheel, one counter wheel, one blade holder, one blade, one intermediate nozzle, one outlet nozzle plus two Allen screws and three grub screws.

Standards and compliance

The manufacturer lists the item as ESD safe in its property table. Manufacturer details according to GPSR are supplied.