ESD rework station for 4 tools with T210, T245, AM120, DR560 and MSE module - JBC DMPSE-2QD

Four tools stand ready at the same time, so changing handles no longer costs heat up time. The DME control unit feeds the T210 precision handle, the T245 general purpose handle, the adjustable AM120 micro tweezers and the DR560 desoldering iron with up to 150 W peak power each. The electric MSE module clears residual solder at 85 % vacuum and 35 SLPM.

Key benefits

• The cartridge type decides compatibility. T210 takes the C210 range, T245 the C245 range, and the DR560 works with desoldering tips of the C560 range.
• Four channels on the DME control unit, compatible with 13 different JBC tools.
• 150 W peak power per tool at 200 W rated power, working range 90 to 450 °C at ± 3 % accuracy.
• The T210 carries fine cartridges for 0402 and smaller, the T245 puts heat into ground planes. Both stay connected permanently.
• The MSE module draws with 42 W, 85 % vacuum and 35 SLPM flow, controlled by pedal if wanted.
• USB-A takes firmware, graphics and profiles and connects a Dino-Lite USB microscope of models AM2011 and AM2111, USB-B goes to the PC and RJ12 drives extraction, peripherals or robots.

Applications

Rework benches in electronics production, development and prototype work, repair of assemblies that mix SMD and through hole parts.

Compatibility and scope of delivery

The delivery covers the DME control unit for four tools, the T210 precision handle, the T245 general purpose handle, the adjustable AM120 micro tweezers, the DR560 desoldering iron for the C560 range and the electric MSE desoldering module.

Standards and compliance

The station complies with CE standards and is built ESD safe. Voltage and resistance between tip and ground meet and exceed ANSI/ESD S20.20 and IPC J-STD-001F. Manufactured by JBC Soldering SL in Molins De Rei, Spain.