Solder fume extraction kit FAE1 for one workstation, 230 m³/h, HEPA H13, 230 V - JBC FAE1-2K1D

Solder fumes appear exactly where the operator is focused. The FAE1 kit moves up to 230 m³/h and the supplied arm works at 80 m³/h right above the assembly. The brushless blower runs only during soldering because extraction is tied to lifting the tool from its stand. That saves energy and extends filter life.

Key benefits

• Three stage FAE1100 filter cassette with M5 pre-filter to EN 779, HEPA H13 to EN 1822 and an activated carbon stage, certified separation of 99.95 percent.
• Automatic start when the tool leaves its stand, the blower stops at idle and the filters age more slowly.
• 55 dBA at one metre, the bench stays quiet enough for conversation even in continuous use.
• 6 kPa vacuum and four RJ12 ports, the unit serves either one or two working areas.
• Dissipative design to ANSI/ESD S20.20, which covers use inside an EPA.
• P405 foot switch included, so extraction also runs without a connection to a JBC station.

Applications

Hand soldering benches in electronics manufacturing, repair and rework stations, laboratories and test areas as well as training rooms where lead free solder is used.

Compatibility and scope of delivery

Delivery includes the FAE1 extraction unit with the FAE1100 filter cassette fitted, one FAE010 hose, one FAE072 arm with bench clamp and the P405 foot switch. The four RJ12 sockets accept JBC stations of the CD, CS, CP, CA, DI, DDE, DME, HDE, JNA, JTSE and NAE ranges, extraction then switches with the tool. Nozzles FAE090, FAE091, FAE092 and FAE093 fit the FAE022 and FAE072 arms.

Standards and compliance

Dissipative properties to ANSI/ESD S20.20, pre-filter to EN 779, HEPA stage H13 to EN 1822. The manufacturer is JBC Soldering SL in Molins de Rei, Spain.