Wristlab II tester ATEX 1 GΩ without accessories - Iteco 9264960.1G

This article is the bare measuring instrument in the ATEX version, without footplate, panel or stand. The difference to the standard 9264.960 is not the housing but the footwear high limit: it is fixed at 1 GΩ so that high resistance ATEX footwear is rated as a pass.

Key features

• Footwear high limit fixed at 1 GΩ, no switching to 10 to 200 MΩ
• Wrist strap test 750 kΩ to 35 MΩ to IEC 61340-5-1
• Left and right shoe measured separately at 50 V or 100 V
• Relay contact for releasing the EPA access
• Housing of 156 x 110 x 34 mm and 340 g, powered by a 9 V battery or 9 V DC

Four operating modes

• Simultaneous measurement of wrist strap and footwear in a single test
• Wrist strap only, for operators seated at the workstation
• Footwear only, for visitors without a wrist strap
• HandsFree: if both shoes pass the series measurement, the internal relay switches and releases the access gate to the EPA

Applications

Replacement or second unit for test points at entrances where an explosive atmosphere has to be considered next to the ESD requirement.

Matching articles

Footplate 9264.965, instruction panel 9264.962 and stand-up column 9264.953 complete the instrument into a full station. Ready built versions are the ATEX wall station 9264.950.1G and the ATEX stand-up station 9264.952.1G. Recalibration is covered by 9264.955.

Made in Italy by Iteco, with an ISO 9000 traceable calibration report.