Images are examples, some edited with AI. The technical data are authoritative. AI notice
Flow Sensor SFAH-10U-Q6S-PNLK-PNVBA-M8 - Festo 8058470
Festo sensor for reliable monitoring of position, pressure or status in the pneumatic system.
Net
excl. VAT
€287.10
Item
FES-8058470
Manufacturer no.
SFAH-10U-Q6S-PNLK-PNVBA-M8
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
Festo sensor for reliable monitoring of position, pressure or status in the pneumatic system. The key technical data of this genuine Festo article are listed below.
Technical data
| Permission | RCM mark<br>c UL us - Listed (OL) |
|---|---|
| CE certificate (see declaration of conformity) | acc. to EU-EMV Directive<br>acc. to EU-RoHS Directive |
| KC-mark | KC-EMV |
| Certified awarding point | UL E322346 |
| Material information | RoHs compliant |
| Measured parameter | Mass flow<br>Volume flow rate |
| Flow direction | Uni-directional |
| Measurement principle | Thermic |
| Measurement process | Heat Transfer |
| Flow measurement range starting value [l/min] | 0,200 |
| Flow measurement range end value [l/min] | 10,0 |
| Operating pressure [bar] | -0.9 to 10 |
| Operating medium | Druckluft nach ISO 8573-1:2010 [6:4:4]<br>Stickstoff<br>Argon |
| Medium temperature [°C] | 0 to 50 |
| ambient temperature [°C] | 0 to 50 |
| Nominal temperature [°C] | 23 |
| Accuracy flow value | ± (2% o.m.v. + 1% FS) |
| Repeatability null point in ± %FS [%FS] | 0,2 |
| Repeatability clamp in ± %FS [%FS] | 0,8 |
| Temperature coefficient clamp in ± %FS/K | type 0,15%FS/K |
| Pressure dependency clamp in ± %FS/bar [%FS/b.] | 1 |
| Control output | 2 x PNP or 2 x NPN switchable |
| Switch function | Window comparator<br>Threshold comparator<br>Auto difference monitoring |
| Switching element function | Opener/closer switchable |
| Max. output current [mA] | 100 |
| Analogue output | 0 - 10 V<br>4 - 20 mA<br>1 - 5 V |
| Flow characteristic curve starting value [l/min] | 0 |
| Flow characteristic curve end value [l/min] | 10,0 |
| Max. load resistance current output [Ohm] | 500 |
| Min. load resistance voltage output [kOhm] | 20 |
| Short circuit resistance | yes |
| Overload resistant | Available |
| Report | IO-Link |
| IO-Link, report | Device V 1.1 |
| IO-Link, profile | Smart sensor profile |
| IO-Link, function classes | Teach channel<br>Diagnosis<br>Identification<br>Binary data channel (BDC)<br>Process data variables (PDV) |
| IO-Link, communication mode | COM2 (38.4 kBaud) |
| IO-Link, SIO mode support | yes |
| IO-Link, port type | A |
| IO-Link, process data width IN | 3 Bytes |
| IO-Link, process data contents IN | 1 bit BDC (Volume monitoring)<br>14 bit PDV (Flow measurement)<br>2 bit BDC (Flow monitoring) |
| IO-Link, service data unit IN | 32 bit Volumen-/Massemesswert |
| IO-Link, minimum cycle time | 4 ms |
| IO-Link, data memory needed [Byte] | < 0,5 kB |
| Operating voltage range DC [V] | 22 to 26 |
| Empty run current [mA] | <= 25 mA |
| Reverse polarity protection | for all electrical connections |
| Electrical connection 1, connection type | Plug |
| Electrical connection 1, connection technology | M8x1 A coded to EN 61076-2-104 |
| Electrical connection 1, number of pins / wires | 4 |
| Fastening type | With Accessories |
| installation position | arbitrary |
| Pneumatic connection | For hose exterior diameter 6 mm |
| Pneumatic connection, connection outlet | straight |
| Product weight [g] | 60 |
| Housing material | PA reinforced |
| From medium contacting materials | NBR<br>high-alloyed stainless steel<br>PA reinforced<br>Alu wrought alloy, anodised<br>Epoxy resin<br>Silicon<br>Silicon nitride |
| Display type | Illuminating LCD Multiple |
| Presentable unit(s) | g<br>g/min<br>l<br>l/h<br>l/min<br>scft<br>scft/h<br>scft/min |
| Setting options | IO-Link<br>Teach-In<br>über Display und Tasten |
| Tamper-proof fuse | IO-Link<br>PIN code |
| Protection category | IP40 |
| Pressure drop [mbar] | < 5 mbar |
| Protection class | III |
| Corrosion resistant class KBK | 2 - moderate corrosion stress |
| Weight | 0.080000 |
| Manufacturer | Festo |
| Manufacturer Nr. | SFAH-10U-Q6S-PNLK-PNVBA-M8 |
| EAN | 4052568295523 |
| HS-Code | 90268020 |
| GPSR manufacturer information | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Condition of article | New |
| Article authenticity | Original product |
| Material | Polyamide (PA) |
| Medium | Compressed air, neutral gases |
| Corrosion resistance class CRC | 2 - moderate corrosion stress |
| Mounting position | arbitrary |
| Norm | DIN EN 61076-2-104 |
| Operating conditions | ISO 8573-1 |
| Series | SFAH |
| Betriebsdruck max [bar] | 10.000000 |
| Protection class (IP) | IP40 |
| Temperature (max.) | 50 |
Downloads
Accessories
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day. Ask a question
