Images are examples, some edited with AI. The technical data are authoritative. AI notice

Desoldering Braid Soder-Wick Lead-Free 2.4 mm x 1.5 m, no-clean flux, lead-free - Chemtronics SW40-4-5

Chemtronics ✓ Original product Brand new

Single-layer desoldering braid for lead-free solders, 2.4 mm wide and 1.5 m long, for large pads. Its low mass removes solder at lower temperature with shorter contact time, and the no-clean flux leaves no ionic residue. Supplied on an ESD-safe bobbin.

Net
€6.13
excl. VAT
Item WL85002
Manufacturer no. SW40-4-5

Available

Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

Lead-free solders melt considerably hotter than tin/lead, which raises the risk of lifted pads and thermally stressed components during rework. Soder-Wick Lead-Free uses a single-layer copper ribbon instead of a flattened braided tube: it has less mass than conventional desoldering braids, heats up faster and removes lead-free solder at lower temperature with shorter contact time. The 2.4 mm wide braid is sized for large pads.

Benefits

  • Engineered for high-temperature lead-free solders, also usable with tin/lead solders
  • Transfers heat to the solder joint faster than conventional desoldering braids
  • Non-corrosive, ultra high purity no-clean flux that leaves no ionic contamination
  • Particularly effective for removing solder residue from SMT pads
  • RoHS compliant
  • Supplied on an ESD-safe, static dissipative bobbin to protect sensitive components
  • Sealed in nitrogen-flushed packaging so moisture and oxygen do not oxidise the copper

Applications

Place the braid over the solder, set a freshly tinned tip on it at about 45 degrees and wait until the solder is drawn up. Lift iron and braid together so the braid does not solder itself to the board. Trim the spent section and continue with fresh braid. Chemtronics recommends replacing braid after about two years in storage, as oxidised copper wicks more slowly.

Technical data

Manufacturer part numberSW40-4-5
Product lineSoder-Wick Lead-Free
SizeNo. 4
Width2.4 mm
Length1.5 m (5 ft)
Colour codeblue
Materialpure copper braid
Constructionsingle-layer ribbon
Fluxno-clean, synthetic, ultra high purity
PackagingESD-safe, static dissipative bobbin
SpecificationsMIL-F-14256 F, NASA-STD-8739.3, DOD-STD-883E method 2022, ANSI/IPC J-STD-004, RoHS
ESD-safeyes
Weight0.05 kg
ManufacturerChemtronics
Manufacturer Nr.SW40-4-5
HS-Code74130000
GPSR manufacturer informationChemtronics, ITW Contamination Control Electronics Saffierlaan 5 NL-2132 Hoofddorp www.chemtronics.com
Condition of articleNew
Article authenticityOriginal product
ESD versionESD (antistatic)
Overall length [mm]1500

Downloads

Accessories

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.

Customers Who Bought This Item Also Bought