Images are examples, some edited with AI. The technical data are authoritative. AI notice
Desoldering Braid Soder-Wick Lead-Free 2.2 mm x 1.5 m, no-clean flux, lead-free - Chemtronics SW40-3-5
Single-layer desoldering braid for lead-free solders, 2.2 mm wide and 1.5 m long, for medium pads. Its low mass removes solder at lower temperature with shorter contact time, and the no-clean flux leaves no ionic residue. Supplied on an ESD-safe bobbin.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
Lead-free solders melt considerably hotter than tin/lead, which raises the risk of lifted pads and thermally stressed components during rework. Soder-Wick Lead-Free uses a single-layer copper ribbon instead of a flattened braided tube: it has less mass than conventional desoldering braids, heats up faster and removes lead-free solder at lower temperature with shorter contact time. The 2.2 mm wide braid is sized for medium pads.
Benefits
- Engineered for high-temperature lead-free solders, also usable with tin/lead solders
- Transfers heat to the solder joint faster than conventional desoldering braids
- Non-corrosive, ultra high purity no-clean flux that leaves no ionic contamination
- Particularly effective for removing solder residue from SMT pads
- RoHS compliant
- Supplied on an ESD-safe, static dissipative bobbin to protect sensitive components
- Sealed in nitrogen-flushed packaging so moisture and oxygen do not oxidise the copper
Applications
Place the braid over the solder, set a freshly tinned tip on it at about 45 degrees and wait until the solder is drawn up. Lift iron and braid together so the braid does not solder itself to the board. Trim the spent section and continue with fresh braid. Chemtronics recommends replacing braid after about two years in storage, as oxidised copper wicks more slowly.
Technical data
| Manufacturer part number | SW40-3-5 |
|---|---|
| Product line | Soder-Wick Lead-Free |
| Size | No. 3 |
| Width | 2.2 mm |
| Length | 1.5 m (5 ft) |
| Colour code | green |
| Material | pure copper braid |
| Construction | single-layer ribbon |
| Flux | no-clean, synthetic, ultra high purity |
| Packaging | ESD-safe, static dissipative bobbin |
| Specifications | MIL-F-14256 F, NASA-STD-8739.3, DOD-STD-883E method 2022, ANSI/IPC J-STD-004, RoHS |
| ESD-safe | yes |
| Weight | 0.05 kg |
| Manufacturer | Chemtronics |
| Manufacturer Nr. | SW40-3-5 |
| HS-Code | 74130000 |
| GPSR manufacturer information | Chemtronics, ITW Contamination Control Electronics Saffierlaan 5 NL-2132 Hoofddorp www.chemtronics.com |
| Condition of article | New |
| Article authenticity | Original product |
| Country of Manufacture | United States |
| ESD version | ESD (antistatic) |
| Overall length [mm] | 1500 |
Downloads
Accessories
Overcoat Pen CircuitWorks, Acrylic Conformal Coating Green, 4.9 g - Chemtronics CW3300G
Item WL86022Desoldering Braid Soder-Wick Rosin 5.1 mm x 1.5 m, Type R rosin flux - Chemtronics SW80-6-5
Item WL86030Desoldering Braid Soder-Wick Lead-Free 2.4 mm x 1.5 m, no-clean flux, lead-free - Chemtronics SW40-4-5
Item WL85002Desoldering Braid Soder-Wick Rosin 0.8 mm x 1.5 m, Type R rosin flux - Chemtronics SW18015
Item WL84106Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.











