Images are examples, some edited with AI. The technical data are authoritative. AI notice
Desoldering Braid Soder-Wick No Clean 1.8 mm x 3 m, halide-free no-clean flux - Chemtronics SW60-3-10
No-clean desoldering braid of oxygen-free copper with halide-free organic flux, 1.8 mm wide and 3 m long, for medium pads. According to the manufacturer it desolders up to 40 % faster than competitive no-clean braids. Supplied on an ESD-safe bobbin.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
Where boards are not washed after soldering, rework must not leave harmful flux residues either. Soder-Wick No Clean combines pure, oxygen-free copper braid with a patented organic no-clean flux and, according to Chemtronics, desolders up to 40 % faster than competitive no-clean braids. The 1.8 mm wide braid on a 3 m bobbin is sized for medium pads.
Benefits
- Patented non-corrosive, halide-free organic no-clean flux
- Desolders up to 40 % faster than competitive no-clean braids and leaves boards cleaner
- Meets Bellcore TR-NWT-000078 and ANSI/IPC SF-818 for surface insulation resistance
- Suitable for BGA rework: pads can be cleaned in three to four passes
- Supplied on an ESD-safe, static dissipative bobbin to protect sensitive components
- Sealed in nitrogen-flushed packaging so moisture and oxygen do not oxidise the copper
Applications
Place the braid over the solder, set a freshly tinned tip on it at about 45 degrees and wait until the solder is drawn up. Lift iron and braid together so the braid does not solder itself to the board. Trim the spent section and continue with fresh braid. Chemtronics recommends replacing braid after about two years in storage, as oxidised copper wicks more slowly.
Technical data
| Manufacturer part number | SW60-3-10 |
|---|---|
| Product line | Soder-Wick No Clean |
| Size | No. 3 |
| Width | 1.8 mm |
| Length | 3 m (10 ft) |
| Colour code | green |
| Material | pure, oxygen-free copper braid |
| Flux | no-clean, organic, halide-free |
| Packaging | ESD-safe, static dissipative bobbin |
| Specifications | MIL-F-14256 F, NASA-STD-8739.3, DOD-STD-883E method 2022, ANSI/IPC J-STD-004, MIL-STD-883B, Bellcore TR-NWT-000078, ANSI/IPC SF-818 |
| ESD-safe | yes |
| Weight | 0.1 kg |
| Manufacturer | Chemtronics |
| Manufacturer Nr. | SW60-3-10 |
| HS-Code | 74130000 |
| GPSR manufacturer information | Chemtronics, ITW Contamination Control Electronics Saffierlaan 5 NL-2132 Hoofddorp www.chemtronics.com |
| Condition of article | New |
| Article authenticity | Original product |
| Country of Manufacture | Germany |
| ESD version | ESD (antistatic) |
| Overall length [mm] | 3000 |
Downloads
Accessories
Overcoat Pen CircuitWorks, Acrylic Conformal Coating Green, 4.9 g - Chemtronics CW3300G
Item WL86022Desoldering Braid Soder-Wick Rosin 5.1 mm x 1.5 m, Type R rosin flux - Chemtronics SW80-6-5
Item WL86030Desoldering Braid Soder-Wick Lead-Free 2.4 mm x 1.5 m, no-clean flux, lead-free - Chemtronics SW40-4-5
Item WL85002Desoldering Braid Soder-Wick Rosin 0.8 mm x 1.5 m, Type R rosin flux - Chemtronics SW18015
Item WL84106Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.












