Images are examples, some edited with AI. The technical data are authoritative. AI notice
Desoldering Braid Soder-Wick Rosin 5.1 mm x 1.5 m, Type R rosin flux - Chemtronics SW80-6-5
Pure copper desoldering braid with ultra high purity Type R rosin flux, 5.1 mm wide and 1.5 m long, for large lugs and terminals. Wicks solder fast to reduce the risk of heat damage to board and component. Supplied on an ESD-safe bobbin.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
Removing solder from large lugs and terminals calls for a braid that wicks fast and keeps heat away from the board. According to Chemtronics, Soder-Wick Rosin has the fastest wicking action of the Soder-Wick range: the light, pure copper braid carries heat to the joint quickly even at low iron temperatures, and the 5.1 mm wide braid draws up the solder before pad and component stay hot for too long.
Benefits
- Non-corrosive, ultra high purity Type R rosin flux to MIL-F-14256 F, J-STD-004 type ROL0
- Will not leave ionic contamination on the board
- Rosin flux residues can be removed with a flux remover
- Supplied on an ESD-safe, static dissipative bobbin to protect sensitive components
- Sealed in nitrogen-flushed packaging so moisture and oxygen do not oxidise the copper
Applications
Place the braid over the solder, set a freshly tinned tip on it at about 45 degrees and wait until the solder is drawn up. Lift iron and braid together so the braid does not solder itself to the board. Trim the spent section and continue with fresh braid. Chemtronics recommends replacing braid after about two years in storage, as oxidised copper wicks more slowly. Remove rosin residues after rework with a flux remover.
Technical data
| Manufacturer part number | SW80-6-5 |
|---|---|
| Product line | Soder-Wick Rosin |
| Size | No. 6 |
| Width | 5.1 mm |
| Length | 1.5 m (5 ft) |
| Colour code | red |
| Material | pure copper braid |
| Flux | Type R rosin, J-STD-004 type ROL0 |
| Packaging | ESD-safe, static dissipative bobbin |
| Specifications | MIL-F-14256 F type R, NASA-STD-8739.3, DOD-STD-883E method 2022, ANSI/IPC J-STD-004 type ROL0 |
| ESD-safe | yes |
| Weight | 0.1 kg |
| Manufacturer | Chemtronics |
| Manufacturer Nr. | SW80-6-5 |
| HS-Code | 74130000 |
| GPSR manufacturer information | Chemtronics, ITW Contamination Control Electronics Saffierlaan 5 NL-2132 Hoofddorp www.chemtronics.com |
| Condition of article | New |
| Article authenticity | Original product |
| Country of Manufacture | United States |
| ESD version | ESD (antistatic) |
| Overall length [mm] | 1500 |
Downloads
Accessories
Desoldering Braid Soder-Wick Lead-Free 2.2 mm x 1.5 m, no-clean flux, lead-free - Chemtronics SW40-3-5
Item WL86109Overcoat Pen CircuitWorks, Acrylic Conformal Coating Green, 4.9 g - Chemtronics CW3300G
Item WL86022Desoldering Braid Soder-Wick Lead-Free 2.4 mm x 1.5 m, no-clean flux, lead-free - Chemtronics SW40-4-5
Item WL85002Desoldering Braid Soder-Wick Rosin 0.8 mm x 1.5 m, Type R rosin flux - Chemtronics SW18015
Item WL84106Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.












