PCL100 Metal-In ESD shielding bag for cleanroom class 100, 75 x 125 mm, pack of 100 - A1-ESD EP0701302

Small parts that leave a cleanroom production area for dispatch or intermediate storage need packaging that drains charge without introducing particles or outgassing of its own. The PCL100 shielding bag with Metal-In construction is certified to IEST-STD-CC1246E for cleanroom class 100 and its 75 x 125 mm format suits connectors, sensors and single small populated assemblies.

Benefits

• The 75 x 125 mm format takes single components without excess volume, so the bag stays flat inside the transport container.
• Metal-In build with the aluminium layer protected inside the laminate, where handling cannot abrade it.
• Surface resistance of 10E4 to 10E11 ohm inside and 10E11 ohm outside, so the contents are decoupled in a controlled way instead of being discharged abruptly.
• Certification to IEST-STD-CC1246E for cleanroom class 100 makes use in a cleanroom environment verifiable and easy to document.
• Free from amines, silicones and heavy metals, which leaves no residue on sensitive surfaces.
• Heat-sealable at a film thickness of 0.071 mm and 40 percent transparent, so the bag closes tightly and its contents stay visible.

Technical data

Application

The bag is used in cleanroom and electronics manufacturing whenever components leave the ESD protected area. In the 75 x 125 mm format the typical content is a single connector, a sensor or a small circuit board. Intermediate storage of tested assemblies in the cleanroom store is just as common. The PCL100 range is also available in further bag formats.